If you are planning on giving your home a blast of refreshment then painting is the way to go. But there is a right and wrong way to tackle this type of job. Blistering paint can be resolved by sanding the area and using a primer before painting. Cracking can be handled the same way, scrape and prime. When applying your top coat, be sure you are using enough paint or your will find the finished product to be thin and drab. Staining can be a challenge due to impatience since the stain has to cure. In any event, be sure to follow proper steps and not short cuts when painting over imperfections.
Key Takeaways:
- Painting is one of the cheapest and most simple ways to improve architecture.
- Paint blisters denote an underlying problem that needs corrected, or the bubbling will occur again.
- It’s often possible to touch up paint, and use clever brushstrokes on a problem area, instead of repainting the entire room.
““The loss of adhesion between the paint film and surface is usually caused by heat, moisture or a combination of both,” Mundwiller says.”
Read more: https://freshome.com/fix-painting-mistakes-and-problems/
Leave a Reply