Bathtubs, Vanities & Bathroom Fixtures - Articles for DIY and Home Improvement

How To Paint: A Room

August 27, 2013 By vdodson Leave a Comment

Painting entire rooms may be my least favorite DIY project.  It is the easiest way to transform the look of your home but it can be a pain in the neck.  Here are some quick tips to help you get the best results.

How to Paint Your Room

Start Off Right
Make it easy on yourself and do it like the pros. Start by emptying the room or at least giving yourself access to all of the walls by grouping and covering furniture in the center. Mask off the floor carefully with tape and drop cloths, rosin paper, or painter’s plastic. Shut off the power to the room and remove lighting fixtures and electrical plates. Remove the window hardware as well. Some skip these steps and wind up spending more time cleaning up drips and spills or replacing ruined items.

Prep Your Room for House Painting
Prep is as important as paint. Fill and patch nail holes and imperfections and clean the woodwork. Prime any bare wood, new drywall, or stained areas.

Begin at the Top
Paint the room from the top down. Start with the ceiling, cutting in from the edges with a brush and rolling the rest in long, even strokes with a roller on an extension rod. Wait between steps for the paint to dry. Cut in for the walls next, using a brush or paint pad to follow the line of the ceiling. Don’t worry too much about neatness around the trim since you’ll paint that last. Actually, a good thick layer between the wall and trim will help fill any gaps for a uniform look.

Cover All Imperfections
The walls need at least two coats with a roller: the first will hide any imperfections in the wall, the second will even out the finish. Use an extension roller here to keep your strokes and pressure even and to save your back.

Don’t Forget Finishing Touches 
Once the walls are dry, tackle the trim from the top down with a good 3- or 4-inch brush. If your hand isn’t steady, you can mask window panes with tape and stick-on corners. A small paint pad made especially for a sash will help you stay inside the lines, and a good sharp razor blade will get rid of any mistakes after the paint is dry.

Quick Tip: Painting a Room: bobvila.com

http://www.thetubconnection.com/copper-sinks-columbus

http://www.thetubconnection.com/bathtubs.html

http://www.thetubconnection.com/clawfoot-tub.html

http://www.thetubconnection.com/showers.html

Filed Under: Features Tagged With: bob vila, c, how to, Paint

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Popular Posts

How Much Do Clawfoot Tubs Weigh?

Interestingly, clawfoot tub styles vary in weight due to the material it is … [Read More...]

clawfoot tub 05

Are Clawfoot Tubs Comfortable?

Are Clawfoot Tubs Comfortable? You bet they are! A clawfoot tub can … [Read More...]

The Best Living Room Design Ideas We Saw In 2020

There are some easy ways to liven up your living space and one of the ways … [Read More...]

Design Trends That Are Outside The Box

There are many different design trends that are happening right now that … [Read More...]

5 Improvements To Consider When Remodeling A Bathroom

Renovating your bathroom can be a great way to spruce up your home's … [Read More...]

A Little Trick to Get the Best Deal on New Kitchen Appliances

Research is essential when purchasing a new appliance, but so is knowing if … [Read More...]

Copyright © 2025 · News Pro Theme on Genesis Framework · WordPress · Log in