To create a DIY PVC pipe wall, you’re going to need to purchase 4″ PVC, acetone, plywood, sandpaper, caulking, and polyurethane adhesive. The PVC will need to be sliced right down the center lengthwise before anything else is completed. You then need to sand down every piece of PVC piping, and then wipe it down with acetone in order to remove any debris. You will eventually lay the PVC onto the pieces of plywood with the polyurethane glue.
Key Takeaways:
- To create DIY PVC pipe walls, you’re going to need: PVC, plywood, acetone, caulk, polyurethane adhesive, and sandpaper.
- Once you have the PVC piping, slice it directly down the center lengthwise. The piece that you use should be 4″ long.
- The acetone is used to wipe down the PVC piping, clearing it from debris after you’ve sanded it down.
“Caroline tapped Anne once again to help tackle the space — along with a team of handy friends — and pull off this stunning DIY PVC Pipe Wall studio.“
Read more: https://www.designsponge.com/2019/08/diy-glam-pvc-pipe-walls.html
Leave a Reply